MHD F+G Series version 4.82 APKs
- Version: version 4.82
- File size: Vwd
- Requires: Android
- Package Name: com.mhd.flasher.fseries
- Developer: MHD Tuning UG
- Updated: Apr 10, 2018
- Price: FREE
- Rate 4.7 stars – based on 10 reviews
- MHD+ OTS multimap release for N55-E.
- Fixed issue with some OTS maps not loading.
- Fixed issue with N55-E ram logging channels.
The MHD Flasher F+G Series is a complete flash tuning app for your BMW. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance,maximum safety, and unrivaled drivability.
---------------------------------------------
Full OBD Flashing:
You can install MHD right at home and start tuning immediately! Simply download the MHD Flasher F-Series app that connects via a MHD Wifi adapter and your vehicle’s OBD-II port, start the app, and within 5 minutes the initial installation is complete. Further map changes are much faster - only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.
---------------------------------------------
Stage 1, Stage 2 und E85 OTS (Off The Shelf) Maps by PureBoost:
N55 EWG (Vehicles built after 07/2013 with electronic wastegate):
- Stage 1 (up to 360HP/540NM) (not available for M2 and X4 M40i)
- Stage 2 (up to 390HP/580NM)
- Stage 2+ (up to 430HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
N55 PWG (pneumatic wastegate):
- Stage 1 (up to 340HP/540NM)
- Stage 2 (up to 370HP/580NM)
- Stage 2+ (up to 400HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
S55 (BMW M3 / M4 F8x):
- Stage 1 (up to 530HP/700NM)
- Stage 2 (up to 560HP/780NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E30 Maps for ethanol blends of 30%
B58:
- Stage 1 (up to 420HP/580NM)
- Stage 2 (up to 470HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 Maps for ethanol blends of 30%
---------------------------------------------
Monitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout. 50+ engine parameters are available at a glance!
These are some of the available monitors:
- Boost, Boost Target
- Lambda (AFR)
- Intake Air Temp (IAT)
- Ignition Timing per Cylinder
- Coolant Temperature
- Oil Temperature, Oil Pressure
- Transmission Temperature
- High Pressure Fuel Pump (HPFP)
- Throttle Position
- Wastegate Duty-Cycle (WGDC)
- RPM
- Speed
- EGT
And many more…
MHD exclusive advanced monitor:
- Timing Corrections per Cylinder
- Boost target EX which can read higher than 22.x psi (the BMW boost target channel can't)
- Base Compressor Axis: Boost Setpoint, MAF req WGDC.
- Active Torque Limiters
And many more…
---------------------------------------------
These flash options can be applied to any map directly through the app:
- Exhaust Burble (duration & aggressiveness, min speed, min rpm)
- N20 Map Sensor (on N55)
- Remove top speed limiter (Vmax)
- Cold start noise reduction
- Exhaust flap open in sport mode
- Limit power per gear
- XHP TCU flash support (optimized OTS maps)
- Sport cooling mode for increased water / air intercooler cooling (B58 only)
---------------------------------------------
Supported Cars:
M135i F2x N55 2012 - 2016
M235i F2x N55 2013 - 2016
M2 F87 N55 2015 - 2018
335i N55 F3x 2011 - 2015
435i N55 F3x 2013 - 2016
535i / GT N55 F1x 2010 - 2017
640i N55 F0x 2011 - 2017
740i N55 F0x 2012 - 2015
X3 35i N55 F25 2010 - 2017
X4 35i / M40i N55 F26 2014 - 2018
X5 40i N55 F15 2013 - 2018
X6 40i N55 F16 2014 - 2018
M3 S55 F80 2014 - 2019
M4 S55 F82 2014 - 2019
M4 S55 F83 2014 - 2019
M140i F2x 2012 - 2019
M240i F2x 2016 - 2019
340i F3x 2015 - 2019
440i F3x 2016 - 2019
540i G3x 2017 -
640i GT G32 2017 -
740i G1x F0x 2015 -
X3 M40i G01 2017 -
X4 M40i G02 2018 -
X5 40i G05 2018 -
Z4 M40i G29 2019 -
114i F2x 2012 - 2015
116i F2x 2011 - 2015
118i F2x 2011 - 2016
120i F2x 2015 - 2017
316i F3x 2012 - 2018
X-Drive is supported on all cars.
All performance power kit cars are supported.
Check out our homepage / user manual for more information and recommended modifications for each stage.
- MHD F+G Series version 4.77 APKs - [Updated 2024-10-21]
- MHD F+G Series version 4.75 APKs - [Updated 2024-09-04]
- MHD F+G Series version 4.73 APKs - [Updated 2024-07-22]
- MHD F+G Series version 4.68 APKs - [Updated 2024-06-01]
- MHD F+G Series version 4.68 APKs - [Updated 2024-06-01]
- MHD F+G Series version 4.64 APKs - [Updated 2024-04-18]
- MHD F+G Series version 4.60 APKs - [Updated 2024-03-18]
- MHD F+G Series version 4.52 APKs - [Updated 2024-02-07]
- MHD F+G Series version 4.16 APKs - [Updated 2023-11-05]
- MHD F+G Series version 4.11 APKs - [Updated 2023-07-31]
- MHD F+G Series version 4.09 APKs - [Updated 2023-05-24]
- MHD F+G Series version 4.06 APKs - [Updated 2023-03-29]
- MHD F+G Series version 4.01 APKs - [Updated 2023-02-09]
- MHD F+G Series version 3.94 APKs - [Updated 2022-11-14]
- MHD F+G Series version 3.92 APKs - [Updated 2022-09-29]
- MHD F+G Series Vwd APKs - [Updated 2022-08-22]
- MHD F+G Series version 3.83 APKs - [Updated 2022-06-21]
- MHD F+G Series version 2.53 APKs - [Updated 2020-10-21]
- MHD F+G Series version 2.52 APKs - [Updated 2020-09-23]
- MHD F+G Series version 2.51 APKs - [Updated 2020-09-18]
- MHD F+G Series version 2.44 APKs - [Updated 2020-09-08]
- MHD F+G Series version 2.42 APKs - [Updated 2020-08-11]
- MHD F+G Series version 2.41 APKs - [Updated 2020-07-23]
- MHD F+G Series version 2.40 APKs - [Updated 2020-07-16]
- MHD F+G Series version 2.30 APKs - [Updated 2020-06-30]
- MHD F+G Series version 2.21 APKs - [Updated 2020-06-19]
- MHD F+G Series version 2.20 APKs - [Updated 2020-06-18]
- MHD F+G Series version 2.11 APKs - [Updated 2020-06-05]